pekko/akka-docs/rst/java/io.rst

.. _io-java:

I/O (Java)
==========

Introduction
------------

The ``akka.io`` package has been developed in collaboration between the Akka
and `spray.io`_ teams. Its design combines experiences from the
``spray-io`` module with improvements that were jointly developed for
more general consumption as an actor-based service.

This documentation is in progress and some sections may be incomplete. More will be coming.

Terminology, Concepts
---------------------
The I/O API is completely actor based, meaning that all operations are implemented with message passing instead of
direct method calls. Every I/O driver (TCP, UDP) has a special actor, called a *manager* that serves
as an entry point for the API. I/O is broken into several drivers. The manager for a particular driver
is accessible by querying an ``ActorSystem``. For example the following code
looks up the TCP manager and returns its ``ActorRef``:

.. includecode:: code/docs/io/IODocTest.java#manager

The manager receives I/O command messages and instantiates worker actors in response. The worker actors present
themselves to the API user in the reply to the command that was sent. For example after a ``Connect`` command sent to
the TCP manager the manager creates an actor representing the TCP connection. All operations related to the given TCP
connections can be invoked by sending messages to the connection actor which announces itself by sending a ``Connected``
message.

DeathWatch and Resource Management
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I/O worker actors receive commands and also send out events. They usually need a user-side counterpart actor listening
for these events (such events could be inbound connections, incoming bytes or acknowledgements for writes). These worker
actors *watch* their listener counterparts. If the listener stops then the worker will automatically release any
resources that it holds. This design makes the API more robust against resource leaks.
 
Thanks to the completely actor based approach of the I/O API the opposite direction works as well: a user actor
responsible for handling a connection can watch the connection actor to be notified if it unexpectedly terminates.

Write models (Ack, Nack)
^^^^^^^^^^^^^^^^^^^^^^^^

I/O devices have a maximum throughput which limits the frequency and size of writes. When an
application tries to push more data than a device can handle, the driver has to buffer bytes until the device
is able to write them. With buffering it is possible to handle short bursts of intensive writes --- but no buffer is infinite.
"Flow control" is needed to avoid overwhelming device buffers.

Akka supports two types of flow control:

* *Ack-based*, where the driver notifies the writer when writes have succeeded.

* *Nack-based*, where the driver notifies the writer when writes have failed.

Each of these models is available in both the TCP and the UDP implementations of Akka I/O.

Individual writes can be acknowledged by providing an ack object in the write message (``Write`` in the case of TCP and
``Send`` for UDP). When the write is complete the worker will send the ack object to the writing actor. This can be
used to implement *ack-based* flow control; sending new data only when old data has been acknowledged.

If a write (or any other command) fails, the driver notifies the actor that sent the command with a special message
(``CommandFailed`` in the case of UDP and TCP). This message will also notify the writer of a failed write, serving as a
nack for that write. Please note, that in a nack-based flow-control setting the writer has to be prepared for the fact
that the failed write might not be the most recent write it sent. For example, the failure notification for a write
``W1`` might arrive after additional write commands ``W2`` and ``W3`` have been sent. If the writer wants to resend any
nacked messages it may need to keep a buffer of pending messages.

.. warning::
  An acknowledged write does not mean acknowledged delivery or storage; receiving an ack for a write simply signals that
  the I/O driver has successfully processed the write. The Ack/Nack protocol described here is a means of flow control
  not error handling. In other words, data may still be lost, even if every write is acknowledged.

ByteString
^^^^^^^^^^

To maintain isolation, actors should communicate with immutable objects only. ``ByteString`` is an
immutable container for bytes. It is used by Akka's I/O system as an efficient, immutable alternative
the traditional byte containers used for I/O on the JVM, such as ``byte[]`` and ``ByteBuffer``.

``ByteString`` is a `rope-like <http://en.wikipedia.org/wiki/Rope_(computer_science)>`_ data structure that is immutable
and provides fast concatenation and slicing operations (perfect for I/O). When two ``ByteString``\s are concatenated
together they are both stored within the resulting ``ByteString`` instead of copying both to a new array. Operations
such as ``drop`` and ``take`` return ``ByteString``\s that still reference the original array, but just change the
offset and length that is visible. Great care has also been taken to make sure that the internal array cannot be
modified. Whenever a potentially unsafe array is used to create a new ``ByteString`` a defensive copy is created. If
you require a ``ByteString`` that only blocks a much memory as necessary for it's content, use the ``compact`` method to
get a ``CompactByteString`` instance. If the ``ByteString`` represented only a slice of the original array, this will
result in copying all bytes in that slice.

``ByteString`` inherits all methods from ``IndexedSeq``, and it also has some new ones. For more information, look up the ``akka.util.ByteString`` class and it's companion object in the ScalaDoc.

``ByteString`` also comes with its own optimized builder and iterator classes ``ByteStringBuilder`` and
``ByteIterator`` which provide extra features in addition to those of normal builders and iterators.

Compatibility with java.io
..........................

A ``ByteStringBuilder`` can be wrapped in a ``java.io.OutputStream`` via the ``asOutputStream`` method. Likewise, ``ByteIterator`` can we wrapped in a ``java.io.InputStream`` via ``asInputStream``. Using these, ``akka.io`` applications can integrate legacy code based on ``java.io`` streams.

Using TCP
---------

The following imports are assumed throughout this section:

.. includecode:: code/docs/io/IODocTest.java#imports

All of the Akka I/O APIs are accessed through manager objects. When using an I/O API, the first step is to acquire a
reference to the appropriate manager. The code below shows how to acquire a reference to the ``Tcp`` manager.

.. includecode:: code/docs/io/IODocTest.java#manager

The manager is an actor that handles the underlying low level I/O resources (selectors, channels) and instantiates
workers for specific tasks, such as listening to incoming connections.

.. _connecting-java:

Connecting
^^^^^^^^^^

The first step of connecting to a remote address is sending a ``Connect`` message to the TCP manager:

.. includecode:: code/docs/io/IODocTest.java#connect

When connecting, it is also possible to set various socket options or specify a local address:

.. includecode:: code/docs/io/IODocTest.java#connect-with-options

.. note::
  The SO_NODELAY (TCP_NODELAY on Windows) socket option defaults to true in Akka, independently of the OS default
  settings. This setting disables Nagle's algorithm considerably improving latency for most applications. This setting
  could be overridden by passing ``SO.TcpNoDelay(false)`` in the list of socket options of the ``Connect`` message.

After issuing the ``Connect`` command the TCP manager spawns a worker actor to handle commands related to the
connection. This worker actor will reveal itself by replying with a ``Connected`` message to the actor who sent the
``Connect`` command.

.. includecode:: code/docs/io/IODocTest.java#connected

When receiving the :class:`Connected` message there is still no listener
associated with the connection. To finish the connection setup a ``Register``
has to be sent to the connection actor with the listener ``ActorRef`` as a
parameter, which therefore done in the last line above.

Upon registration, the connection actor will watch the listener actor provided in the ``listener`` parameter.
If the listener actor stops, the connection is closed, and all resources allocated for the connection released. During the
lifetime of the connection the listener may receive various event notifications:

.. includecode:: code/docs/io/IODocTest.java#received

``ConnectionClosed`` is a trait, which the different connection close events all implement.
The last line handles all connection close events in the same way. It is possible to listen for more fine-grained
connection close events, see :ref:`closing-connections-java` below.


Accepting connections
^^^^^^^^^^^^^^^^^^^^^

To create a TCP server and listen for inbound connection, a ``Bind`` command has to be sent to the TCP manager.
This will instruct the TCP manager to listen for TCP connections on a particular address.

.. includecode:: code/docs/io/IODocTest.java#bind

The actor sending the ``Bind`` message will receive a ``Bound`` message signalling that the server is ready to accept
incoming connections. The process for accepting connections is similar to the process for making :ref:`outgoing
connections <connecting-java>`: when an incoming connection is established, the actor provided as ``handler`` will
receive a ``Connected`` message whose sender is the connection actor.

.. includecode:: code/docs/io/IODocTest.java#connected

When receiving the :class:`Connected` message there is still no listener
associated with the connection. To finish the connection setup a ``Register``
has to be sent to the connection actor with the listener ``ActorRef`` as a
parameter, which therefore done in the last line above.

Upon registration, the connection actor will watch the listener actor provided in the ``listener`` parameter.
If the listener stops, the connection is closed, and all resources allocated for the connection released. During the
connection lifetime the listener will receive various event notifications in the same way as in the outbound
connection case.

.. _closing-connections-java:

Closing connections
^^^^^^^^^^^^^^^^^^^

A connection can be closed by sending one of the commands ``Close``, ``ConfirmedClose`` or ``Abort`` to the connection
actor.

``Close`` will close the connection by sending a ``FIN`` message, but without waiting for confirmation from
the remote endpoint. Pending writes will be flushed. If the close is successful, the listener will be notified with
``Closed``.

``ConfirmedClose`` will close the sending direction of the connection by sending a ``FIN`` message, but receives
will continue until the remote endpoint closes the connection, too. Pending writes will be flushed. If the close is
successful, the listener will be notified with ``ConfirmedClosed``.

``Abort`` will immediately terminate the connection by sending a ``RST`` message to the remote endpoint. Pending
writes will be not flushed. If the close is successful, the listener will be notified with ``Aborted``.

``PeerClosed`` will be sent to the listener if the connection has been closed by the remote endpoint.

``ErrorClosed`` will be sent to the listener whenever an error happened that forced the connection to be closed.

All close notifications are subclasses of ``ConnectionClosed`` so listeners who do not need fine-grained close events
may handle all close events in the same way.

Throttling Reads and Writes
^^^^^^^^^^^^^^^^^^^^^^^^^^^

*This section is not yet ready. More coming soon*

Using UDP
---------

UDP support comes in two flavors: connectionless and connection-based. With connectionless UDP, workers can send datagrams
to any remote address. Connection-based UDP workers are linked to a single remote address.

The connectionless UDP manager is accessed through ``UdpFF``. ``UdpFF`` refers to the "fire-and-forget" style of sending
UDP datagrams.
 
.. includecode:: code/docs/io/IOUdpFFDocTest.java#manager

The connection-based UDP manager is accessed through ``UdpConn``.

.. includecode:: code/docs/io/UdpConnDocTest.java#manager

UDP servers can be only implemented by the connectionless API, but clients can use both.

Connectionless UDP
^^^^^^^^^^^^^^^^^^

The following imports are assumed in the following sections:

.. includecode:: code/docs/io/IOUdpFFDocTest.java#imports

Simple Send
............

To simply send a UDP datagram without listening to an answer one needs to send the ``SimpleSender`` command to the
``UdpFF`` manager:

.. includecode:: code/docs/io/IOUdpFFDocTest.java#simplesend

The manager will create a worker for sending, and the worker will reply with a ``SimpleSendReady`` message:

.. includecode:: code/docs/io/IOUdpFFDocTest.java#simplesend-finish

After saving the sender of the ``SimpleSendReady`` message it is possible to send out UDP datagrams with a simple
message send:

.. includecode:: code/docs/io/IOUdpFFDocTest.java#simplesend-send


Bind (and Send)
...............

To listen for UDP datagrams arriving on a given port, the ``Bind`` command has to be sent to the connectionless UDP
manager

.. includecode:: code/docs/io/IOUdpFFDocTest.java#bind

After the bind succeeds, the sender of the ``Bind`` command will be notified with a ``Bound`` message. The sender of
this message is the worker for the UDP channel bound to the local address.

.. includecode:: code/docs/io/IOUdpFFDocTest.java#bind-finish

The actor passed in the ``handler`` parameter will receive inbound UDP datagrams sent to the bound address:

.. includecode:: code/docs/io/IOUdpFFDocTest.java#bind-receive

The ``Received`` message contains the payload of the datagram and the address of the sender.

It is also possible to send UDP datagrams using the ``ActorRef`` of the worker:

.. includecode:: code/docs/io/IOUdpFFDocTest.java#bind-send


.. note::
  The difference between using a bound UDP worker to send instead of a simple-send worker is that in the former case
  the sender field of the UDP datagram will be the bound local address, while in the latter it will be an undetermined
  ephemeral port.

Connection based UDP
^^^^^^^^^^^^^^^^^^^^

The service provided by the connection based UDP API is similar to the bind-and-send service we saw earlier, but
the main difference is that a connection is only able to send to the ``remoteAddress`` it was connected to, and will
receive datagrams only from that address.

Connecting is similar to what we have seen in the previous section:

.. includecode:: code/docs/io/UdpConnDocTest.java#connect

Or, with more options:

.. includecode:: code/docs/io/UdpConnDocTest.java#connect-with-options

After the connect succeeds, the sender of the ``Connect`` command will be notified with a ``Connected`` message. The sender of
this message is the worker for the UDP connection.

.. includecode:: code/docs/io/UdpConnDocTest.java#connected

The actor passed in the ``handler`` parameter will receive inbound UDP datagrams sent to the bound address:

.. includecode:: code/docs/io/UdpConnDocTest.java#received

The ``Received`` message contains the payload of the datagram but unlike in the connectionless case, no sender address
is provided, as a UDP connection only receives messages from the endpoint it has been connected to.

It is also possible to send UDP datagrams using the ``ActorRef`` of the worker:

.. includecode:: code/docs/io/UdpConnDocTest.java#send

Again, like the ``Received`` message, the ``Send`` message does not contain a remote address. This is because the address
will always be the endpoint we originally connected to.

.. note::
  There is a small performance benefit in using connection based UDP API over the connectionless one.
  If there is a SecurityManager enabled on the system, every connectionless message send has to go through a security
  check, while in the case of connection-based UDP the security check is cached after connect, thus writes does
  not suffer an additional performance penalty.

Throttling Reads and Writes
^^^^^^^^^^^^^^^^^^^^^^^^^^^

*This section is not yet ready. More coming soon*


Architecture in-depth
---------------------

For further details on the design and internal architecture see :ref:`io-layer`.

.. _spray.io: http://spray.io